Knauf Home Energy Audit in Converse: What to Know First
We provide independent Knauf home energy audit in Converse, TX, with most blower-door diagnostics completed same-day and a written price delivered before any work starts. Most Knauf insulation systems we audit in Converse run between $280 and $620 for a full envelope assessment, depending on home size and whether thermal imaging is needed. If you own a Knauf-insulated home in Converse and your summer cooling bills are climbing faster than your neighbors’, or rooms stay hot while the AC runs nonstop, this page is for you. Call (830) 420-0953 and a live person will pick up, 24/7.
How Knauf Products Fail - and How We Fix Them
- Knauf EcoBatt with ECOSE Technology - settled density in Converse attics. The binder in EcoBatts can sag in attics that cycle past 140°F, which happens regularly in Converse from June through September. We find 6-inch batts compressed to 3-inch effective depth near roof valleys. Our fix: measure the actual R-value with a thermal probe, document the compression pattern, and specify replacement blown-in or dense-pack that won’t sag.
- Knauf Jet Stream Ultra blowing wool - uneven distribution behind kneewalls. This fiberglass blowing wool is common in Converse ranch renovations, but installers often miss cavities behind converted garage kneewalls. We map those voids with infrared during the blower-door test, then specify targeted dense-pack or removal and re-blow with documented coverage.
- Knauf Insulation Board (NIA-spec) - thermal bridging at rim joists. Rigid board cut to fit rim joists in pier-and-beam homes near Foster Road often gaps at the bottom course, creating a 2-inch uninsulated band. We find it with the blower door running and smoke pencil, then specify closed-cell spray or cut-to-fit board with sealed edges.
- Knauf Momentum high-performance batts - mislabeled cavity fit in 1950s framing. Converse has plenty of 2×4 walls on true 16-inch centers, but modern “standard” batts are 15 inches wide and slump. We measure actual stud spacing, note the gap with thermal imaging, and specify proper-width batts or dense-pack alternative.
- Knauf acoustic batts used as thermal insulation - wrong product, wrong place. We see this in DIY attic jobs around Converse: black acoustic batts stuffed in rafter bays, doing almost nothing for thermal resistance. We identify the product by density and color, explain the R-value difference (acoustic batts run R-11 to R-13 where thermal should be R-30+), and specify proper replacement.
Our Knauf Home Energy Audit Process
- 1
Call and schedule. A live person answers. We ask square footage, year built, and what’s driving the call - high bills, hot rooms, or a prior contractor’s work you’re questioning.
- 2
On-site blower-door test. We pressurize the house to 50 pascals and measure CFM50 - the single number showing how much conditioned air escapes through the envelope. We run this before touching anything.
- 3
Thermal imaging and physical inspection. Infrared camera across ceilings and walls while the blower door runs, plus attic entry to inspect Knauf product type, installation quality, and settlement. We photograph everything.
- 4
Written scope and price. Before any work starts, you get a flat price, written scope, and written warranty. Haven Standard Clause 1: no exceptions. If you have a competing quote, we offer a Free Second Opinion - we’ll read it with you.
- 5
Air sealing first, then insulation. Seal the leaks first. Then insulate. The numbers will tell you if it worked. We re-run the blower door after sealing to document the CFM50 drop.
- 6
Documented Photo Record and printed report. You leave with before-and-after blower-door numbers, thermal images, and photos of the work. On applicable jobs, the CFM50 improvement is printed on the spot.
Before
AfterWhat Knauf Home Energy Audit Costs in Converse
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Basic blower-door audit (under 2,500 sq ft) | $280 - $380 | Accessibility, number of attic accesses |
| Full audit with thermal imaging | $420 - $620 | Home size, pier-and-beam vs. slab, ductwork testing added |
| Duct leakage test (Duct Blaster) | $180 - $280 additional | Number of HVAC systems, duct accessibility |
| Written remediation scope | Included | Flat price, no hourly surprises |
Most Converse homes we audit fall in the $340-$480 range for a complete Knauf-focused envelope assessment. Two-story homes or those with conditioned attics run higher. Call (830) 420-0953 for an exact quote - estimates are free, and we deliver a written price before any work starts.
Why Converse Homeowners Call Topside Attic Insulation Converse for Knauf Work
We’re independently owned and operated under The Haven Standard since 2016, and we’re not locked to any single brand. We source Knauf, Owens Corning, Johns Manville, Rockwool, and others - no proprietary product pushed on you. Wes Okafor and our crew have audited Knauf systems in Converse long enough to know which EcoBatt batches from the mid-2010s had binder issues, and which Jet Stream densities actually hold in our heat. Every job gets before-and-after blower-door numbers. The 365-Day Done Right Promise applies to all work. Calls are answered by a live person, 24/7. We also service Reflectix radiant barrier systems where they’re part of the envelope problem.
FAQs
No. As an independent Knauf service provider, our audit is non-invasive - we don’t remove or alter installed product during diagnostics. We photograph condition and measure performance. If remediation is needed, we specify Knauf-compatible materials or alternatives that won’t conflict with any remaining manufacturer coverage. Call (830) 420-0953 to schedule - estimates are free.
We source current Knauf product lines through standard distribution, and we stock compatible alternatives from Owens Corning, Johns Manville, and Rockwool when Knauf lead times stretch. We never leave a cavity empty waiting on a brand name. You’ll see the product spec in your written scope before work starts.
Spot repair is cheaper when settlement is localized - typically $400-$800 to dense-pack voids and re-blow settled areas. Full replacement runs $2,200-$4,800 for a typical Converse attic when the product is degraded, improperly installed, or the wrong type for the cavity. We recommend replacement when the blower-door test shows more than 35% leakage reduction potential from a full envelope fix. Call (830) 420-0953 and we’ll run the numbers both ways.
Same-day availability most weekdays in Converse, next-day for weekends. Emergency scheduling exists for homes with active HVAC failure linked to envelope leaks - call (830) 420-0953 and a live person will route you.
You get a printed blower-door report with CFM50 before and after, dated thermal images, a Documented Photo Record of attic and wall conditions, and the written scope with flat price. These are yours to keep, share with your HVAC contractor, or use for resale disclosure. We don’t withhold reports to pressure a sale.
Written by Wes Okafor, Owner & Lead Insulation Technician, Topside Attic Insulation Converse at Topside Attic Insulation Converse, serving Converse and nearby areas.