GreenFiber Home Energy Audit in Converse: What to Know First
We provide independent GreenFiber home energy audit in Converse, typically completed same-day with a written price before any work starts. Most audits run $180-$340 depending on test scope, and you’ll leave with printed blower-door numbers and thermal images, not a vague recommendation to “add more insulation.” This page is for GreenFiber owners in Converse who want to know why their cellulose isn’t performing and what the fix actually looks like. Call (830) 420-0953 or text us - a live person answers 24/7.
How GreenFiber Products Fail - and How We Fix Them
- GreenFiber All Borate loose-fill settling below labeled R-value in Converse attics. Our infrared scans show 2-3 inch gaps where the product compacted after installation, especially in homes near Foster Road with original 1960s ceiling joists spaced 24 inches on center. The fix isn’t more cellulose - it’s lifting the settled material, sealing the top plates underneath, then reinstalling to proper depth with density-checked blowing.
- GreenFiber Sanctuary batts moisture-staining near HVAC penetrations. We see this in Converse’s spring humidity spikes when bathroom exhausts terminate in attics rather than through the roof. The borate treatment resists mold but doesn’t stop vapor drive. We relocate the exhaust, seal the penetration with fire-rated foam, and replace only the affected batts - not the whole attic.
- GreenFiber Low Dust formula creating false thermal boundaries at knee walls. The reduced-dust binder can clump in restricted spaces, leaving voids behind finished attic storage areas in Live Oak-area homes. We pull back the clumped material, photograph the void with the homeowner present, and re-blow with proper wall-cavity technique.
- GreenFiber stabilized cellulose bridging over unsealed can lights. The adhesive additive makes the product stick where it lands, which masks air leakage paths through non-IC-rated fixtures. Our blower-door test catches this every time - we seal with tenmat covers or replace with airtight LEDs before any cellulose goes back.
- GreenFiber subslab products wicking moisture in Converse’s clay-heavy soils. The gypan-based formulation draws capillary moisture in older ranch slabs without proper vapor barriers. We don’t sell GreenFiber for this application; we specify closed-cell foam or proper dimple-mat systems instead. Honest specification beats brand loyalty.
Our GreenFiber Home Energy Audit Process
- 1
Call and schedule. A live person answers, confirms your GreenFiber product line if you know it, and books a two-hour window. You get a text when your tech is en route.
- 2
Blower-door baseline. We pressurize the house to 50 pascals and record CFM50 - the single number showing how much conditioned air escapes through the envelope. Most Converse homes built 1980-2010 read 3,500-5,500 before work.
- 3
Thermal imaging and physical inspection. We scan with FLIR to find where GreenFiber has settled, clumped, or been installed over unsealed leaks. Every finding gets a photo with a timestamp.
- 4
Written scope and price. Haven Standard Clause 1: flat price, written scope, written warranty before anyone lifts a tool. No work starts without your signature.
- 5
Air sealing first, then insulation correction. We seal top plates, penetrations, and bypasses with appropriate materials - never blow new GreenFiber over an unsealed attic floor. Seal the leaks first. Then insulate. The numbers will tell you if it worked.
- 6
Post-test and documentation. Second blower-door test, printed report with before-and-after CFM50, photo record uploaded to your file. The 365-Day Done Right Promise applies from this moment.
Before
AfterWhat GreenFiber Home Energy Audit Costs in Converse
| Service | Typical Range |
|---|---|
| Basic blower-door test with thermal imaging | $180-$240 |
| Full audit with duct blaster and combustion safety | $280-$340 |
| Air sealing labor (per 1,000 CFM50 reduction targeted) | $450-$780 |
| GreenFiber removal and reinstall with proper depth | $1.20-$1.80/sq ft |
What moves the price: attic accessibility (scissor truss vs. standard framing), extent of settled material requiring removal, and whether we find unsealed HVAC platforms or open soffit chutes that need correction. We also service Reflectix radiant barrier systems when they’re part of the same envelope - no need for a second contractor.
Every audit estimate is free. Bring us a competing written quote and we’ll walk through it with you - our Free Second Opinion, no obligation.
Why Converse Homeowners Call Topside Attic Insulation Converse for GreenFiber Work
We’ve sealed and insulated over 9,000 homes since 2016, every one with a written price first and a documented record at the end. Wes Okafor runs the blower-door himself on complex GreenFiber jobs - the Kennedy-King College building trades training means he reads a pressure pan test the way some guys read a newspaper. Our techs are background-checked, uniformed, and know the difference between All Borate and Low Dust formulations without checking a cheat sheet. The 365-Day Done Right Promise is in writing before we start, and a live person answers (830) 420-0953 at midnight on a Saturday. No voicemail loops. No callback windows measured in business days.
FAQs
No - GreenFiber’s limited warranty covers product defect, not installation or subsequent modification. As an independent GreenFiber service provider, we document our work with photos and blower-door readings so any future claim has clear evidence of what we touched and when. Call (830) 420-0953 if you need help understanding your warranty language.
We source GreenFiber All Borate, Sanctuary, and Low Dust through standard distribution - no proprietary lock-in, no markup for “exclusive” access. If your job calls for a different cellulose brand or a switch to fiberglass or mineral wool, we’ll say so and explain why. The Haven Standard means the right material for the assembly, not the brand that pays a spiff.
Repair is usually 40-60% less when the product is less than 10 years old and the failure is localized settling or moisture staining. Full removal and replacement makes sense when we find multiple unsealed penetrations buried under years of added material, or when the original installation skipped air sealing entirely. We give you both prices in writing and let the numbers decide.
Same-day scheduling is common, and most audits finish in 2-3 hours. If we find combustion safety issues - a cracked heat exchanger or backdrafting water heater - we stop work, explain the hazard, and help you coordinate with a licensed HVAC contractor before we continue. Some things don’t wait for convenience.
We print them. Every applicable job leaves with a two-line report: CFM50 before, CFM50 after, date, technician signature. Wes Okafor started this practice because a homeowner in Converse’s Woodlake neighborhood asked him, “How do I know you did anything?” The numbers answered her. They still do.
Ready to find out what your GreenFiber is actually doing up there? Call (830) 420-0953 for a free estimate. A live person will answer, schedule your audit, and give you a written price before any work starts - that’s Haven Standard Clause 1, and it’s how we’ve operated since 2016.
Written by Wes Okafor, Owner & Lead Insulation Technician, Topside Attic Insulation Converse at Topside Attic Insulation Converse, serving Converse and nearby areas.