Owens Corning Home Energy Audit in Converse: What to Know First
We provide independent Owens Corning home energy audit in Converse, TX, with most audits scheduled within 48 hours and full diagnostic reports delivered before we leave the property. Our written price - flat, itemized, and signed before any work starts - means you’ll know exactly what the audit costs and what it found before you decide on next steps. This page is for Owens Corning homeowners in Converse who need blower-door testing, thermal imaging, or insulation performance verification on the products already in their attic or walls. Call (830) 420-0953 to book or to bring us a competing estimate for a free second opinion.
How Owens Corning Products Fail - and How We Fix Them
- Owens Corning AttiCat blown-in fiberglass settles below labeled R-value in Converse’s heat-and-humidity cycles. The loose-fill product we see most in 2015-2020 builds near Converse North and Live Oak compresses and shifts during summer attic temperatures that regularly exceed 140°F. We measure actual depth against manufacturer spec, identify thin spots with thermal imaging, and recommend dense-pack cellulose or re-blow with proper air sealing first - never over the existing unsealed layer.
- Owens Corning Foamular rigid board gaps at seams and penetrations, creating thermal bypasses. The pink XPS board common in crawl space and rim-joist applications in older Converse ranch homes near Foster Road shrinks slightly over time. Our blower-door test isolates these bypasses; we seal with compatible low-expansion foam and tape per Owens Corning’s published installation guidelines, not caulk that will crack in the first summer.
- Owens Corning EcoTouch batts installed without top-plate sealing fail at the wall-to-attic junction. This is the failure Wes Okafor documented repeatedly in his notebook - R-19 batts looking intact while unsealed top plates bleed conditioned air at 4,000+ CFM50. We pull back the batt, seal the plate with fire-rated caulk or foam, and reinstall.
- Owens Corning ProPink Loosefill with inadequate attic ventilation traps moisture against roof decking. In Converse’s spring storm season, we find this in homes with blocked soffits or missing baffles. Our audit maps airflow paths, clears intake vents, and specifies proper baffle installation before adding any insulation - adding more fiberglass over a moist deck accelerates degradation.
- Owens Corning WeatherLock barrier tape degrades at adhesive seams in Texas UV exposure. On radiant barrier jobs where Owens Corning reflective products were used, we check tape integrity with infrared; failed seams get re-taped with UV-rated aluminum tape or we specify Reflectix as a replacement product with proven local durability.
Our Owens Corning Home Energy Audit Process
- 1
Call and scheduling. A live person answers, confirms your Owens Corning product type if known, and books a two-hour window. You get a text when the technician is en route - Haven Standard: Arrive on schedule.
- 2
Pre-test blower-door reading. We pressurize the house to 50 pascals and record CFM50 baseline. This number goes on your written scope before anyone enters the attic.
- 3
Thermal imaging and physical inspection. We scan for missing insulation, thermal bridging, and moisture signatures specific to Owens Corning fiberglass and foam products. Photos are time-stamped and saved to your Documented Photo Record.
- 4
Duct leakage test if applicable. We seal registers and pressurize the duct system to measure leakage to outside - a separate CFM reading that often explains why the HVAC runs constantly despite adequate attic insulation.
- 5
Written findings and price for remediation. Before we leave, you receive a flat price for any air sealing, insulation correction, or ventilation fix - with the blower-door target we’ll hit if you proceed.
- 6
Post-work verification. On completed jobs, we run the blower door again and publish the before-and-after numbers on your final report. Seal the leaks first. Then insulate. The numbers will tell you if it worked.
Before
AfterWhat Owens Corning Home Energy Audit Costs in Converse
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Standard home energy audit (blower door + thermal imaging) | $350-$550 | Home size, attic accessibility, number of HVAC zones |
| Audit with duct leakage testing | $500-$750 | Duct accessibility, number of returns, need for register sealing |
| Owens Corning-specific insulation inspection and depth verification | $200-$350 | Attic square footage, need for destructive testing (wall probe) |
| Air sealing and top-plate remediation (if found during audit) | $800-$2,200 | Linear feet of top plate, can light count, chase complexity |
Most Converse homeowners with 1,800-2,400 square feet and Owens Corning fiberglass from the 2015-2020 build era fall in the $350-$550 range for the full diagnostic. The price is written and signed before we start; the estimate itself is free. Call (830) 420-0953 for an exact quote - estimates are free.
Why Converse Homeowners Call Topside Attic Insulation Converse for Owens Corning Work
We’re independently owned and operated under The Haven Standard since 2016 - not a franchise, not a manufacturer affiliate. Wes Okafor and our crew have audited and sealed over 9,000 homes, including hundreds in Converse and the older ranch-style stock near Foster Road where unsealed top plates were standard construction. We source Owens Corning materials when they’re the right fit, but we also work with Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, GreenFiber, and Reflectix - no proprietary lock-in means the recommendation follows the diagnosis, not the supplier relationship. Every job closes with a Documented Photo Record and, on applicable work, printed before-and-after blower-door numbers. The 365-Day Done Right Promise applies to all completed work. Calls are answered by a live person, 24/7.
FAQs
No. Owens Corning’s product warranties cover manufacturing defects, not installation or maintenance conditions, and do not restrict who may inspect the installed product. We document our findings with photos and written reports that you can submit to Owens Corning directly if a product defect is suspected. Call (830) 420-0953 to schedule - estimates are free.
We source Owens Corning materials through standard distribution channels; we are not an authorized dealer and do not claim exclusive access. For most Converse homes, we find that quality third-party materials from our multi-brand lineup perform equivalently or better at the same specification, and we will show you both options with prices before you decide. Call (830) 420-0953 to schedule - estimates are free.
Repair is cheaper when the product is intact but poorly installed - settled AttiCat, misaligned batts, or gaps at penetrations that air sealing and spot correction can fix. Replacement makes sense when the product is moisture-damaged, contaminated, or so far below spec that the cost of correction approaches new installation. Our audit gives you both numbers. Call (830) 420-0953 to schedule - estimates are free.
Most audits are scheduled within 48 hours of your call. Same-day availability happens when a Converse appointment shifts, but we do not manufacture urgency - we book the next open slot and show up in the window we gave you. Call (830) 420-0953 to check current availability - estimates are free.
You receive a written scope with our findings, a flat price for any recommended work, time-stamped thermal images, and the pre-work blower-door CFM50 reading. If you proceed with remediation, the post-work blower-door number is added to your final report. Every customer gets this; nothing is held back or available only on request. Call (830) 420-0953 to schedule - estimates are free.
Written by Wes Okafor, Owner & Lead Insulation Technician, Topside Attic Insulation Converse at Topside Attic Insulation Converse, serving Converse and nearby areas.