Rockwool Home Energy Audit in Converse: What to Know First
We provide independent Rockwool home energy audit in Converse, typically completed same-day with written results delivered before we leave. Most audits run between $280 and $520 depending on home size and whether duct-blaster testing is included. We do not start any diagnostic work without a written price, and we do not sell insulation upgrades on the same visit as the audit.
This page is for Rockwool owners in Converse, including homes near Foster Road and the older ranch builds around Judson High School, who need a third-party energy audit to verify existing insulation performance, identify air-leakage paths, or document conditions for a warranty or resale disclosure. Call (830) 420-0953 to schedule. A live person answers.
How Rockwool Products Fail - and How We Fix Them
- Comfortbatt R-23 settled below nominal thickness in 2×6 walls. Rockwool’s batts are denser than fiberglass, but in Converse’s clay-heavy soil zone where foundation settling is common, wall compression and repeated humidity cycling can reduce the effective R-value by 15-20% before visible sagging occurs. We pull a corner batt, measure compressed thickness against the labeled loft, and use borescope inspection where removal isn’t practical.
- Comfortboard 80 used as exterior sheathing with inadequate rainscreen gap. In Converse’s sudden spring downpours and summer sun cycles, trapped moisture behind impermeable WRBs wicks into the board’s edges. Our audit includes infrared scanning of exterior walls to identify thermal anomalies at Comfortboard seams, then recommends whether the fix is gap correction or localized replacement.
- AFB evo batts in metal stud assemblies with thermal bridging unaddressed. Rockwool’s AFB line performs well for fireblocking, but metal studs conduct heat regardless of cavity insulation. We see this in newer Converse townhomes near Loop 1604 where the batt itself tests fine but the assembly underperforms. Our fix: document the bridging with surface temperature readings and specify a thermal break in the retrofit scope.
- Toprock DD dense-pack in sloped ceilings with missed eave venting. Converse’s 1950s-1970s ranches often have narrow soffits where installers packed Toprock too tight against the roof deck, choking intake airflow. We probe the eave with a borescope and measure deck temperature; if it’s within 10°F of ambient attic air, the dense-pack is doing its job. If not, we map the blocked bays for selective redistribution.
- Rockwool cavity fill with unsealed top plates bleeding conditioned air. This isn’t a product failure, it’s a sequence failure, and we see it constantly. Rockwool doesn’t stop air movement. In a Foster Road ranch we audited last spring, the Comfortbatt was pristine but the blower-door reading was 3,800 CFM50 because every wall-to-attic junction was open. We seal first, then reassess whether the existing Rockwool still meets the target after the envelope tightens.
Our Rockwool Home Energy Audit Process
- 1
Call intake. You speak to a live person, not a callback queue. We confirm square footage, Rockwool product type if known, and whether you have recent utility bills showing a spike. We schedule the audit and email a written price before arrival.
- 2
Exterior and attic inspection. We photograph insulation depth, distribution, and any visible compression or water staining. We note the roof venting strategy, soffit condition, and whether bath fans terminate properly.
- 3
Blower-door test. We pressurize the house to 50 pascals and record CFM50, the single number that quantifies total envelope leakage. This establishes the baseline before any invasive checking.
- 4
Thermal imaging and targeted diagnostics. Infrared camera scan identifies thermal bypasses, missing insulation pockets, and duct leakage signatures. If ductwork is accessible, we add a duct-blaster test for an additional line item you already approved in writing.
- 5
Findings review and documentation. We sit down with you, show the photos, explain the blower-door number in context for your home’s size and age, and deliver a printed report with prioritized recommendations. No same-day sales pitch for additional work.
- 6
Cleanup and record delivery. We leave the attic as found, minus any inspection holes we patch. You receive the Documented Photo Record and written scope within 24 hours.
Before
AfterWhat Rockwool Home Energy Audit Costs in Converse
Most Rockwool home energy audits in Converse fall between these ranges:
- Basic audit (blower-door, visual, thermal imaging): $280-$380 for homes under 2,500 sq ft
- Standard audit (adds attic borescope and wall spot-checks): $350-$450
- Full audit with duct-blaster testing: $420-$520
What moves the price: home size above 3,000 sq ft, multiple HVAC zones, inaccessible crawl spaces requiring additional setup time, or same-day rush scheduling. We also provide a Free Second Opinion on any written estimate from another contractor, no audit fee required if you bring competing documentation.
Every price is flat, written, and delivered before work starts. Haven Standard Clause 1. Call (830) 420-0953 for your written estimate.
Why Converse Homeowners Call Topside Attic Insulation Converse for Rockwool Work
We’re independently owned and operated under The Haven Standard since 2016. Wes Okafor, our owner and lead technician, started in Kennedy-King College’s building trades program on Chicago’s South Side and has spent two decades applying that training in Texas attics. He and the crew know Rockwool’s density and moisture behavior from hands-on work in Converse homes, not from a product sheet.
Our 365-Day Done Right Promise covers all completed work. Every job that involves air sealing ships with before-and-after blower-door numbers so you can verify the result. We also service Reflectix and other major brands, so if your audit reveals that Rockwool isn’t the right product for a specific application, we won’t force a match. Calls are answered live, 24/7. Seal the leaks first. Then insulate. The numbers will tell you if it worked.
FAQs
No. Rockwool’s limited warranty covers manufacturing defects in the product itself, not installation or audit work performed by independent contractors. As an independent Rockwool service provider, we document conditions without altering installed product, and our photo record can actually support a warranty claim if we find a factory defect. If you need manufacturer contact information for a direct claim, we include it in your report. Call (830) 420-0953 to schedule.
Most Converse appointments are available within 48 hours, same-day if the schedule allows. We do not use callback windows measured in business days. A live person answers (830) 420-0953 and can confirm real availability while you’re on the line.
Repair is viable when the product is dry, uncompressed, and properly placed but the assembly underperforms due to air leakage or thermal bridging. Replacement makes sense when Rockwool has been wet, rodent-compromised, or installed in a location it was never specified for, like below-grade rim joists without moisture management. Our audit separates product condition from assembly performance so you spend money on the right fix. Written scope, written price, before any recommendation. Call for a free estimate.
We do not stock Rockwool product for retail sale; we source through regional distributors including Johns Manville, Knauf, and Owens Corning channels for multi-brand flexibility. For audit-only visits, no parts are needed. If the audit reveals a fix requiring new material, we specify the exact product line and source, with delivery typically 24-48 hours. We never substitute without written approval.
You receive a printed blower-door report with CFM50 before and after any sealing demonstration, thermal images with temperature annotations, a written findings summary with prioritized recommendations, and a Documented Photo Record of all inspection points. This is standard on every visit, not available on request. Under Haven Standard, you leave with the record before we leave the driveway.
Written by Wes Okafor, Owner & Lead Insulation Technician, Topside Attic Insulation Converse at Topside Attic Insulation Converse, serving Converse and nearby areas.