Why Converse Homeowners Choose Reflectix Insulation
Our Converse Reflectix service provides independent Reflectix insulation in Converse, TX for homeowners whose radiant barrier has failed, was installed wrong, or never performed the way it should. As an independent Reflectix service provider - not affiliated with or authorized by Reflectix - we diagnose the real problem, use OEM-compatible parts or quality replacements, and document every job with before-and-after blower-door numbers so you know what changed. Call (830) 420-0953 for a written price before any work starts.
Reflectix radiant barrier products show up in a lot of Converse attics, especially the ranch-style and two-story tract homes built between 1995 and 2010 for the Randolph AFB market. Those builders often stapled Reflectix double-reflective roll to roof rafters with the shiny side facing the wrong direction, skipped air gaps entirely, or used non-perforated product in crawl spaces that needed to breathe. R-19 in a Converse summer is optimism, not insulation - and a radiant barrier installed wrong is just shiny wallpaper.
We’ve worked on enough of these homes to know the pattern. The attic access hatches in subdivisions near Foster Road were often installed with zero insulation or weatherstripping, a thermal bypass that kills radiant barrier performance before the foil even goes up. We fix that first. Seal the leaks first. Then insulate. The numbers will tell you if it worked.
Why Trust Topside Attic Insulation Converse for Your Reflectix Insulation?
Wes Okafor, our owner and lead technician, grew up on Chicago’s South Side and learned insulation fundamentals at Kennedy-King College’s building trades program before spending two decades applying that training in Texas attics. He and our crew have served Converse for years, including older ranch homes near Foster Road where unsealed top-plate penetrations - the gaps where walls meet the attic floor - were bleeding conditioned air long before anyone touched the blown-in cellulose. Wes runs a blower-door test, which pressurizes the house to measure air leakage in CFM50 (cubic feet per minute at 50 pascals), before and after every applicable job so customers leave with a printed report showing exactly how much the envelope tightened.
We know Reflectix product lines by sight and by failure mode. We can tell whether your Reflectix Double Reflective Insulation Roll (48 in. x 25 ft., 5/16 in. thick) has delaminated beyond saving, or whether the staple-tab edging on your 16 in. or 24 in. width product has torn away from rafters due to wind washing in a vented attic. We stock genuine Reflectix aluminum foil tape and quality continuous-foil aftermarket barriers for replacement - no knock-off bubble foil with a thin foil layer that’ll fail in two Converse summers.
Our 365-Day Done Right Promise applies to every Reflectix job. Under Haven Standard Clause 1, you get a flat price, written scope, and written warranty before anyone lifts a tool. We publish before-and-after blower-door numbers on every applicable job, and we include a Documented Photo Record on every visit - not available on request, just delivered.
Common Reflectix Insulation Problems We Fix in Converse
- Foil delamination and bubbling on the outward-facing surface. After years of attic heat cycling in Converse’s 150°F+ summer attics, the aluminum foil face separates from the polyethylene bubble core, exposing the plastic and killing radiant barrier performance. We see this most on Reflectix Double Reflective Insulation Roll installed 15-20 years ago in the Rolling Oaks and Converse Heights subdivisions. Once the foil face is gone, the product is done - no amount of taping brings back the emissivity that blocks radiant heat.
- Staple-tab edging torn away from rafters or studs by wind washing. In vented attics with inadequate baffles, airflow pulls at the edges of Reflectix Double Reflective Foil Insulation with Staple Tab until the tabs rip free, leaving long open gaps between foil sections. The attic looks insulated from the hatch, but the radiant barrier has a Swiss-cheese pattern that lets heat straight through. We find this constantly in Converse homes built 1997-2006 with original gable venting and no ridge vent.
- Aluminum foil tape joints dried out, wrinkled, or dust-contaminated. Reflectix tape creates a continuous radiant barrier only when the seam is clean and the adhesive stays viable. Converse’s dust, pollen, and occasional roof-deck condensation degrade tape joints within 5-8 years. Each failed seam becomes a thermal break. We remove old tape entirely, clean the foil surface with a solvent wipe, and re-tape with fresh product - or replace the barrier if the foil itself has degraded too far for adhesion.
- Moisture trapped between Reflectix and roof decking or crawl space wall. This happens when perforated and non-perforated product get swapped. Non-perforated Reflectix R-21 installed against a crawl space wall in Converse’s Gulf-driven humidity (dewpoints in the mid-70s) turns into a vapor barrier that traps moisture against framing. Perforated product in an attic with no air gap lets humid air condense on the cool side. We’ve found mold and early wood rot behind mis-specified Reflectix in Converse crawl spaces - the fix is removal, drying, and reinstall with the correct product orientation and ventilation.
- Shiny side installed facing inward, or no air gap maintained. Reflectix radiant barrier needs an air gap of at least 3/4 in. on the reflective side to work. Stapled tight to roof rafters with the shiny side facing the insulation instead of the roof deck, it becomes a conductor, not a reflector. A Converse homeowner called us because their attic was 130°F by mid-afternoon even with a new AC unit, and we found Reflectix double-reflective roll stapled to the roof rafters with the shiny side facing inward and the tape joints completely failed. We removed about 800 sq ft of sagging, delaminated Reflectix, sealed and prepped the deck, then installed a proper radiant barrier foil with an air gap and brought the attic ventilation up to code. Their attic dropped nearly 25°F on the next 100° day and the AC stopped short-cycling.
Before
AfterReflectix Parts & Our Repair-vs-Replace Approach
We use genuine Reflectix rolls and tape when re-using existing product or matching an installation. For full replacement, we stock quality continuous-foil aftermarket barriers with a heavier aluminum layer than the knock-off bubble foil you’ll find online. The decision between repair and replace is straightforward: if the Reflectix has lost its foil face or the perforation pattern is wrong for the space, we tell you honestly that replacement beats taping it back together. If the foil is intact and only the tape has failed, a clean re-tape with proper surface prep can extend service life another 8-10 years.
We keep common Reflectix-compatible materials on our trucks in Live Oak, TX and Converse, so most repairs don’t wait on shipping. For replacement jobs, we measure, spec, and install in one trip when possible. Call (830) 420-0953 - we’ll read your situation and give you a straight answer on repair versus replace, with a written price before any work starts.
Our Reflectix Service Process - Step by Step
- 1
Diagnosis with thermal imaging and blower-door test. We pressurize your home to measure baseline air leakage in CFM50, then use infrared to locate thermal bypasses, failed tape joints, and moisture intrusion behind Reflectix. We photograph everything and show you on the screen before we quote.
- 2
Written scope and price - Haven Standard Clause 1. You get a flat price, written scope, and written warranty before anyone lifts a tool. No exceptions. We specify whether we’re repairing, removing, or replacing your Reflectix, and which product line we’ll use.
- 3
Air sealing before any insulation work. We seal top plates, can lights, penetrations, and that uninsulated attic access hatch - universal in Converse homes built 1997-2006 - before touching the radiant barrier. This is non-negotiable. Blowing insulation or hanging foil over an unsealed attic floor is malpractice.
- 4
Reflectix repair, removal, or replacement with correct product spec. We install perforated or non-perforated product as the space requires, maintain required air gaps, and use mechanical fasteners plus tape - never staples alone in wind-washed attics.
- 5
Post-work blower-door test and documentation. On applicable jobs, we run the blower door again and print your before-and-after CFM50 reading. You get the Documented Photo Record, the written warranty, and our 365-Day Done Right Promise in hand before we leave.
Reflectix Products We Service & Install in Converse
- Reflectix Double Reflective Insulation Roll (48 in. x 25 ft., 5/16 in. thick) - repair, re-tape, or full replacement
- Reflectix Double Reflective Foil Insulation with Staple Tab (16 in. and 24 in. widths) - tab repair, wind-washing mitigation, or upgrade to continuous-foil barrier
- Reflectix R-21 Reflective/Bubble/Radiant Barrier - perforated and non-perforated, correctly spec’d for attic or crawl space
- Reflectix Radiant Barrier Roof Decking (sheathing) - inspection, repair, and integration with attic ventilation upgrades
- Reflectix Crawl Space/Basement Wall Insulation Roll - removal of moisture-trapped installs, proper vapor management
We stock genuine Reflectix tape and quality aftermarket continuous-foil barriers locally for fast turnaround on Converse jobs.
We Also Service These Brands
We’re not a single-brand shop. Our crews work with Owens Corning, Johns Manville, Knauf, Rockwool, CertainTeed, Icynene, Demilec, and GreenFiber products daily. If your home has a mix of materials - blown fiberglass under a Reflectix radiant barrier, spray foam in the crawl space, batt walls - we handle the whole envelope without pushing proprietary products. Materials sourced from major manufacturers, no lock-in.
FAQs - Reflectix Insulation Service in Converse
No. We are an independent Reflectix service provider, not affiliated with or authorized by Reflectix Inc. We use OEM-compatible parts and quality aftermarket materials, and we never imply manufacturer endorsement. Our expertise comes from field experience in Converse attics, not a dealer certificate.
It needs an air gap of at least 3/4 inch on the reflective side to function as a radiant barrier. Stapled tight to rafters with no gap, Reflectix becomes a conductor that transfers heat rather than reflecting it. We find this installation error constantly in Converse and Reflectix in Universal City tract homes. The fix is proper fastening with spacers or a different product designed for direct contact. Call (830) 420-0953 and we’ll assess your specific rafter spacing and ventilation.
That’s delamination caused by heat cycling in your attic - 150°F+ day after day degrades the adhesive bond between the aluminum foil and the polyethylene bubble core. Once it starts, it spreads. The product has reached end of life. Re-taping won’t restore the emissivity that blocks radiant heat. We remove delaminated Reflectix, inspect the decking for moisture damage, and install a replacement barrier with proper air gap and ventilation. Call (830) 420-0953 for a written price on removal and replacement.
Perforated Reflectix has tiny holes that let water vapor pass through, making it appropriate for attic applications where you want radiant barrier performance without trapping moisture. Non-perforated acts as a vapor barrier and belongs only where you intentionally want to block moisture migration - typically crawl space walls in dry conditions, or as part of a designed vapor management system. In Converse’s humid climate with Gulf-driven dewpoints in the mid-70s, installing non-perforated Reflectix in a crawl space without a drying strategy traps moisture against framing. We’ve removed moldy installs where the wrong product was spec’d. We test moisture conditions and spec accordingly.
Yes, if the foil face is still intact and clean. We remove all old tape, solvent-wipe the seam surfaces, and apply fresh aluminum foil tape with a roller for full contact. If the foil itself is delaminated, dusty beyond cleaning, or the product has sagged and torn at staple points, replacement is the honest recommendation. We don’t tape over failing substrate. Call (830) 420-0953 - we’ll inspect and tell you which category you’re in, with a written price either way.
It helps when installed correctly with an air gap and proper ventilation, but it’s not a substitute for adequate R-value. In Converse’s Climate Zone 2 with five-plus months of cooling load, the optimal approach is air sealing first, then sufficient blown-in or batt insulation to current IECC standards, then a radiant barrier if your roof deck configuration benefits - typically dark shingles, limited shade, and a vented attic. We run the blower-door test and thermal imaging to show you exactly where your heat gain is coming from before recommending either path. Call (830) 420-0953 for a free assessment and written scope.
Most Reflectix repair jobs in Converse run between $180 and $450 for tape replacement and localized fixes. Full removal and replacement of a failed radiant barrier in a typical 1,800-2,400 sq ft attic runs $1,800 to $3,400, including air sealing, proper ventilation upgrades, and post-work blower-door documentation. Crawl space Reflectix work varies more based on access and moisture remediation needs. We provide a flat, written price before any work starts - no estimates that balloon. Call (830) 420-0953 for an exact quote; estimates are free.
Reflectix product warranties are typically limited to manufacturing defects and don’t cover field installation issues, which is what we usually address. As an independent service provider, our work doesn’t activate or void manufacturer coverage - we’re simply not part of that chain. We warranty our own installation and materials through our 365-Day Done Right Promise. If you have a valid Reflectix manufacturing claim, we’ll document the product condition and help you pursue it, but our focus is fixing the installation so your attic performs.
Most repairs and re-taping jobs in Converse finish in a single day. Full removal, air sealing, and replacement of a failed attic radiant barrier typically takes one to two days depending on attic access, square footage, and whether we need to upgrade ventilation. We don’t leave mid-job - your crew stays until the day’s scope is complete and documented. Call (830) 420-0953 to schedule; we answer live 24/7.
Book Your Reflectix Service in Converse, TX
Call (830) 420-0953 now. A live person answers, 24/7. We’ll schedule a technician to inspect your Reflectix installation, run a blower-door test if applicable, and deliver a written price before any work starts. Every job closes with a Documented Photo Record and, on air-sealing work, before-and-after CFM50 readings you can hold in your hand. Haven Standard since 2016: flat price, written scope, written warranty - no exceptions.
Written by Wes Okafor, Owner at Topside Attic Insulation Converse, serving Converse since 2016.