Reflectix Insulation in Converse, TX | Topside Attic Insulation Converse
Reflectix radiant barrier service in Converse typically runs $1,800-$3,400 for a full attic retrofit, and most jobs finish in one day. We’re an independent contractor, not authorized by Reflectix, with hundreds of installs across Converse’s 1995-2010 tract-home stock. Call (830) 420-0953 for a written price before any work starts.
Why Converse Residents Choose Us for Reflectix Service
We’ve handled Reflectix products in Converse attics since before the current wave of radiant-barrier marketing hit, long before we started offering our Spray Foam Insulation in Converse. Wes Okafor, our owner, picked up his insulation fundamentals at Kennedy-King College’s building trades program on Chicago’s South Side, then spent two decades applying that classroom work in Texas attics. He and our crew know how Reflectix foil facings behave when attic temps push past 150°F for months straight, which is standard in Converse from June through September.
We don’t claim any partnership with Reflectix. We’re independent. That matters because it means we specify what’s actually appropriate for your attic, not what a brand catalog pushes. Our Reflectix sales & service page details the product lines we work with, but the short version is this: we’ve seen what fails, we know why, and we fix it with genuine Reflectix rolls when they make sense and quality alternatives when they don’t. Every job gets a written scope and written price before anyone touches a staple gun. Under our Haven Standard, you also get a Documented Photo Record and, on applicable jobs, before-and-after blower-door numbers showing exactly how much your envelope tightened.
Converse is our regular territory. We know the subdivisions off Rocket Lane, the ranch-style homes near Foster Road, and the specific construction shortcuts that show up in homes built for the Randolph AFB market. That local knowledge changes what we recommend and how we install it.
Common Reflectix Insulation Problems We Solve in Converse
- Foil delamination from the bubble core. Converse attics hit 150°F-plus for five months running, and Gulf humidity keeps dewpoints in the mid-70s. That combination cooks Reflectix foil facings until they separate from the polyethylene bubble core, especially on roof-deck installs. We find this in homes throughout the Autumn Run and Foster Road areas, where original radiant barrier was installed in the early 2000s and has simply aged out.
- No air gap = no radiant barrier performance. Reflectix needs a minimum 3/4-inch air space on the reflective side to work. In Converse’s speed-built tract homes, we regularly find it stapled flush to roof sheathing. The foil can’t reflect what it can’t “see.” It’s just expensive wallpaper at that point. We fix this with proper standoff installation or alternative mounting methods.
- Moisture trapping at the attic floor. Converse’s mid-70s dewpoint summers mean any vapor that reaches the attic can condense on cool surfaces. When Reflectix is laid over old, settled blown fiberglass, it creates a vapor barrier in the wrong place. We’ve pulled installations where the foil was wet underneath and the framing showed early mold staining. Proper vapor management comes first.
- Rodent damage along knee-wall and duct-wrap seams. Open attic chases in Converse homes, especially those with no air-sealing at top plates, become highways for pests. Reflectix used as duct wrap or knee-wall backing gets shredded at seams. We see this in older ranch-style homes near Foster Road where the original builder left large gaps at wall-to-attic junctions.
- Bare attic access hatches. This one’s nearly universal in Converse homes built 1997-2006. The hatch is just drywall or plywood, zero insulation, no weatherstripping. Even a perfect radiant barrier install is undermined by a square foot of uninsulated hole. We treat this as mandatory, not optional.
Before
AfterReflectix Service in Converse: What Local Conditions Mean for Your Equipment
Converse sits in IECC Climate Zone 2, which means current code calls for R-38 minimum in attics. Most of the housing stock here, built in the rush to serve Randolph Air Force Base through the late 1990s and early 2000s, was insulated to minimum code with blown fiberglass or unfaced batts. Twenty-plus years of 150°F summers have compacted that insulation well below R-30, and in many attics we measure effective R-values in the teens.
The high concentration of military renters and PCS-driven turnover means many of these homes have never had an energy audit or insulation upgrade. The attic access hatch detail is telling: in homes built between 1997 and 2006, we find bare hatches with no weatherstripping on better than eight out of ten jobs. That’s not a Reflectix problem specifically, but it completely undermines any radiant barrier performance. Conditioned air pumps straight through that gap while the foil barrier sits useless above.
We fix the hatch first. Insulated cover, weatherstripped seal. Then we assess whether the existing Reflectix is recoverable or compromised. Then we insulate to proper R-value with Converse Attic Insulation. “Seal the leaks first. Then insulate. The numbers will tell you if it worked.” That’s how we approach every Converse attic.
Reflectix Models & Products We Service in Converse
We work with four main Reflectix product families:
- Double Reflective Insulation Roll - foil-faced bubble core, common in attic floor and knee-wall applications
- Reflective Foil Insulation with white polyethylene facing - used where a clean interior finish is desired
- Radiant Barrier Roof Deck / attic rafter rolls - the most common Converse install, and the most commonly botched
- Reflective duct insulation wrap - for HVAC ductwork in unconditioned attic spaces
We stock genuine Reflectix rolls for like-for-like replacement when the existing installation is structurally sound. When seams are too far gone or the foil has delaminated, we specify quality foil-faced alternatives that match the application. We’re not locked into any single brand. Our materials come from Owens Corning, Johns Manville, Knauf, Rockwool, and others. No proprietary product requirements.
Reflectix Service Pricing in Converse
Most Reflectix radiant barrier jobs in Converse fall between $1,800 and $3,400. The range depends on attic square footage, whether we’re recovering existing Reflectix or stripping and replacing, and whether the job includes air-sealing and R-value top-up to current Climate Zone 2 standards.
A typical breakdown:
- Reflectix radiant barrier installation (proper air gap): $1.20-$1.80 per square foot of attic footprint
- Attic air-sealing (top plates, penetrations, can lights): $400-$800
- Insulated, weatherstripped attic hatch: $180-$280
- Blown insulation top-up to R-38: $1.50-$2.20 per square foot
Our free estimate includes a full attic inspection, thermal imaging scan, and written scope with flat price. No work starts without that written price. Call (830) 420-0953 to schedule - estimates are free, and we offer a Free Second Opinion on any competing written quote.
Serving Converse, TX - Our Local Coverage Area
We’re based in the Converse area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Reflectix Insulation in Converse
No. Reflectix radiant barrier is not an R-value substitute. In Converse’s Climate Zone 2, it should be paired with R-38 or better attic insulation. The foil blocks radiant heat transfer, but conduction and convection still move heat through the assembly. We’ve measured attic floors where Reflectix alone was installed over bare drywall - the ceiling was still hot. Call (830) 420-0953 for an estimate that includes proper R-value.
The 150°F-plus attic temperatures and Gulf humidity in Converse degrade the adhesive bond between the foil facing and the polyethylene bubble core over time. This is accelerated when the product was installed with no air gap, causing the foil to heat-soak. We see this most in 1997-2006 tract homes where installation quality matched the construction speed. Replacement with proper standoff mounting fixes it.
We don’t recommend it. Converse’s mid-70s dewpoint summers create condensation risk at the attic floor. Laying Reflectix over old fiberglass traps vapor against the ceiling drywall. We remove or work around the old material, air-seal the attic floor properly, then install insulation and radiant barrier in the correct sequence. Call (830) 420-0953 and we’ll show you what your specific attic needs.
R-38 minimum for attic insulation, per current IECC Climate Zone 2 standards. Reflectix contributes negligible R-value by itself - its job is reducing radiant heat gain, not providing conductive resistance. We specify the combined assembly to hit R-38 or better, and we document it with before-and-after blower-door readings so you can verify the envelope performance.
Yes. The 1995-2010 homes that dominate Converse were built with minimal attention to top-plate sealing, and the bare attic hatch detail is nearly universal. Without sealing these bypasses, conditioned air escapes continuously and the radiant barrier performs in a leaky envelope. We air-seal first, always. It’s not an upsell. It’s prerequisite work.
Service Areas Near Converse
We serve Converse service area homeowners directly and regularly handle jobs in surrounding communities. Our crew runs Reflectix service in Universal City for homes near the base, and we cover Reflectix service in Live Oak as well. Windcrest, Schertz, and Selma are also in our normal service radius.
Book Your Reflectix Service in Converse Today
Same-day appointments are often available. Call (830) 420-0953 to speak with a live person - no voicemail loops - and get your free written estimate. Every job starts with a flat price and written scope, ends with a Documented Photo Record, and is backed by our 365-Day Done Right Promise.
Written by Wes Okafor, Owner at Topside Attic Insulation Converse, serving Converse since 2016.