Spray Foam Insulation in Selma - Same-Day Service, Done Right the First Time

Fast, Reliable Spray Foam Insulation Across Selma

Spray foam insulation in Selma typically runs $2,800-$7,500 for most residential jobs, and our crews can usually start within 3-5 business days of your written estimate. We dispatch from our San Antonio office and serve Selma directly - no subcontractor networks, no callback windows measured in business days. If your home sits in one of the 2000s-era subdivisions off I-35 or Loop 1604, you’re likely living with builder-grade attic insulation that has degraded well below its original rating. Call (830) 420-0953 and we’ll confirm your parcel’s county jurisdiction, measure your air leakage with a blower-door test, and deliver a written price before any work starts.

Call (830) 420-0953

Why Topside Attic Insulation Converse Is Selma’s Preferred Spray Foam Insulation Company

We’ve sealed and insulated more than 9,000 homes since 2016, and a growing share of them sit in Selma’s master-planned communities - Retama Springs, The Heights at Retama, and the corridor along Lookout Road. Our Selma customers tend to find us after reading three-star reviews as carefully as five-star ones, which is why we publish before-and-after blower-door numbers on every applicable job. The numbers speak plainly: a pressurization reading of 4,200 CFM50 before sealing and 2,100 after tells you exactly what you paid for.

Response time to Selma averages same-day or next-day for estimates, with crews typically starting within a week. Our scheduling team answers calls live, 24/7 - no voicemail loops. Every Selma job begins with a written scope, flat price, and written warranty under our Haven Standard, and closes with a Documented Photo Record. If something’s not done right, our 365-Day Done Right Promise means we make it right.

Our Spray Foam Insulation Services in Selma

Open-Cell Spray Foam

Open-cell spray foam - the half-pound density product that expands to fill cavities and remains vapor-permeable - is our standard for Selma garage ceilings and conditioned attic applications. In a typical Retama Springs home built around 2010, open-cell across the garage ceiling drops radiant heat gain from the attic above while allowing any incidental moisture to dry to the interior. We air-seal top plates, can lights, and penetrations first; we never blow or spray over an unsealed surface. Most open-cell jobs in Selma run $2.80-$3.40 per board foot installed.

Closed-Cell Spray Foam

Closed-cell spray foam - the two-pound density product that acts as its own vapor barrier and adds structural rigidity - is what we specify for Selma rim joists, crawl spaces, and any application where moisture migration is a concern. The South Texas humidity that compounds Selma’s 150°F attic temperatures makes closed-cell essential at the rim joist, where ground moisture meets conditioned space. A typical Selma rim-joist treatment with closed-cell runs $1,800-$3,200 depending on linear footage and access. We source closed-cell products from Owens Corning, Johns Manville, and Demilec - no proprietary lock-in, so we match the material to the condition.

Rim Joist Spray Foam

Selma’s slab-on-grade construction, standard in 2000s-2010s tract homes, leaves rim joists as the primary thermal bridge between foundation and first floor. Unsealed rim joists pull humid air into wall cavities year-round. In the field, we’ve found that spraying the garage ceiling without first sealing the rim joist and wall-to-ceiling seams lets hot, humid South Texas air migrate behind the foam, causing condensation and eventual adhesion failure at the deck. Our protocol: seal first, insulate second. Every time.

Garage Ceiling Spray Foam

Garage ceiling spray foam is the upgrade path we recommend most often in Selma, and for specific reason. In the Retama Springs area, we opened up a 2010 builder-grade garage to spray the ceiling and rim joists, and the homeowner’s Wi-Fi smart opener kept faulting because the unconditioned attic above it was cycling past 150°F every afternoon. We went closed-cell on the rim joist and open-cell across the garage ceiling with Icynene, air-sealed the top plates, and the opener’s faults stopped along with a measurable drop in the garage’s radiant heat gain. Most Selma garage ceiling jobs run $2,200-$4,500.

Before

After

Trusted Brands We Service in Selma

We stock and install spray foam systems from Owens Corning, Johns Manville, and Knauf - brands with established distribution in the San Antonio metro, which means no special-order delays for Selma jobs. Our crews carry multiple formulations on the truck, so if your rim joist needs closed-cell and your garage ceiling needs open-cell, we switch materials on-site without a return trip. Every product ships with manufacturer documentation and integrates into our written warranty under the Haven Standard.

Common Spray Foam Insulation Problems We See in Selma Homes

• Settled builder-grade insulation masking air leakage. That R-30 blown-in from 2008 has compressed to something closer to R-19, but the bigger problem is the air moving through top plates and recessed fixtures. Homeowners assume spray foam is unnecessary when the real loss is leakage, not R-value alone. Our blower-door test finds it in 20 minutes.
• Garage ceiling foam applied over unsealed rim joists. We’ve pulled failed foam from three Selma garages in the past two years where a previous contractor skipped the rim joist. Hot, humid air migrated behind the foam, condensation formed at the deck, and adhesion failed within three summers. We remove the failed material, seal properly, and re-spray - with documentation.
• Wrong permit jurisdiction stalling completion. Selma’s city limits straddle the Bexar-Guadalupe county line, so a spray foam job that looks routine can flip permit jurisdiction mid-estimate. One subdivision lot pulls a Bexar County permit while the lot behind it needs Guadalupe County, with different inspector contacts and timelines. We confirm the parcel’s county before quoting, because spray foam is a permit-inspection item here in a way that simple blown-in top-offs often aren’t.
• Wi-Fi garage opener faults from unconditioned attic heat. The 150°F attic above a Selma garage cooks smart openers, backup batteries, and any stored temperature-sensitive items. Spray foam on the garage ceiling and rim joist drops that radiant load measurably - we document the before-and-after surface temperatures.

Pricing for Spray Foam Insulation in Selma, TX

We Also Serve Cities Near Selma

Our crews work throughout the I-35 corridor, including Selma‘s immediate neighbors: Converse, Universal City, Live Oak, and Windcrest. Each market has its own housing stock and permit landscape, and we adjust our scope accordingly. If you’re unsure whether your address falls in Selma proper or one of these adjacent cities, we’ll confirm during scheduling.

FAQs - Spray Foam Insulation in Selma